1W Fixed Attenuator 1-20dB DC-3G N Male to N Female
- Product No.: FA-1NMF-3G-XXD (XX=attenuation)
- Spec.: 1W, DC-3GHz, 1-20dB or customized, N Male to N Female
- Features: Low PIM, Low VSWR
Description
| Electrical & Mechanical Specifications | ||||||||||||||||
| Frequency Range | DC-3GHz | |||||||||||||||
| Impedance (Ω) | 50 | |||||||||||||||
| Power Capacity (W) | 1 | |||||||||||||||
| VSWR | ≤1.20:1 | |||||||||||||||
| Attenuation (dB) | 03 | 5 | 6 | 10 | 15 | 20 | ||||||||||
| Accuracy (dB) | ±0.4 | ±0.5 | ±0.5 | ±0.5 | ±0.7 | ±1.0 | ||||||||||
| Connector Interface | N Male to N Female | |||||||||||||||
| Environmental Specifications | ||||||||||||||||
| Operating Temperature(℃) | -30~ +65 | |||||||||||||||
| Application | Indoor or outdoor use | |||||||||||||||
| Remark | For more specifications, please contact us. | |||||||||||||||
Applications
Attenuators are used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed.
Attenuators are used to extend the dynamic range of devices such as power meters and amplifiers, reduce signal levels to detectors, match circuits and are used daily in lab applications to aid in product design. Attenuators are also used to balance out transmission lines that otherwise would have unequal signal levels.
